
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X130-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 130mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X130-10-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. By turning the rear stopper screw, you can trim the nominal 130mm travel back by up to 10mm, creating a precise 120-130mm usable stroke window for exact end-position tuning.
This adjustable design eliminates the need to swap cylinders or add external stops during machine commissioning or product changeovers. It features an extruded aluminum barrel with sensor grooves on both sides, and because this SKU includes the -S magnet, it is fully compatible with AirTAC CMSE reed and DMSE electronic solid-state sensors for position feedback.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X130-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 130 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×130 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 120-130mm travel window during machine commissioning to perfect seating or clamping forces without swapping physical hardware.
Quickly adjust the retract end-stop when a production line switches to a slightly different product size, saving downtime on the factory floor.
The rear adjuster acts purely as a travel stop to set deceleration, not as a lock; it will not hold a load without live air pressure. For fail-safe load holding, consider the SAIL or BSAI series.
When replacing an ISO 15552 cylinder, verify this exact configuration: 32mm bore, 130mm stroke, 10mm adjustment range, PT tapered port thread, and the -S magnet option. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, deliberately omitting FB, CA, CB, and CR brackets. Since the 130mm stroke is below the 300mm threshold, side-load concerns are minimal, but always ensure standard alignment to prevent premature seal wear.
Quick checklist
At 0.9 MPa, the push force increases to 724N. The operational speed range is 30-800 mm/s.
The rear adjuster screw acts as a mechanical stop that lets you shorten the 130mm nominal stroke by up to 10mm, providing a usable travel window of 120-130mm. It only sets the travel end and deceleration; it does not lock or hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.