
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X130-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 130mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X130-30-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. The built-in magnet (-S) enables direct mounting of CMSE reed and DMSE solid-state sensors along the dual-side barrel grooves.
This specific SKU provides a 100-130mm usable travel window, letting you dial back the nominal 130mm stroke by up to 30mm. The external rear stopper allows fine end-position tuning at commissioning without adding external stops. The 12mm carbon steel rod and M10x1.25 thread handle moderate side loads, while the mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X130-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 130 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×130 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 100-130mm end-position during product size changeovers without physically swapping the cylinder or adding external stopper blocks.
Fine-tune the retract distance by up to 30mm at commissioning to perfect the timing and physical placement of tooling on the assembly line.
Leverage the integrated -S magnet and dual sensor grooves to easily mount CMSE or DMSE switches for precise position feedback in compact setups.
Choose this 32mm bore when an application requires precise variable end-stops; stepping up to a 40mm bore raises the 0.5 MPa push force to 628N for heavier payloads. The adjustable stroke is selected over a fixed SAI cylinder when you need commissioning fine-tune capabilities or product-size changeovers on a machine. The rear adjuster acts purely as a travel stop and does not hold the load without live air; for fail-safe load holding, consider the SAIL or BSAI series. To replace an ISO 15552 cylinder, match the 32mm bore, 130mm stroke, 30mm adjustment, PT port, and -S magnet.
With a 130mm stroke, the 12mm rod is adequately supported for standard loads, but long unsupported strokes over 300mm require an external guide to prevent rod bending.
Quick checklist
The rear adjuster screw acts as a mechanical stop that lets you shorten the effective travel from the 130mm nominal stroke down to 100mm, creating a 100-130mm adjustable window without changing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.