
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X130-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 130mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X130-40 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that creates a 90-130mm usable travel window from its 130mm nominal stroke.
This 32mm bore variant uses a PT tapered G1/8 port and a 12mm carbon steel rod with an M10x1.25 thread. The extruded aluminum barrel includes sensor grooves on both sides for CMSE reed or DMSE electronic switches, while the rear screw functions strictly as a travel stop for deceleration rather than a load-holding lock.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X130-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 130 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×130 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 90-130mm travel window during product size transitions to set new end stops without physically replacing the cylinder.
Fine-tune the exact retract position during initial machine setup to resolve minor mechanical alignment variations.
Adjust the effective stroke on the fly for multi-format production lines requiring different retraction distances.
The 40mm adjustment range is ideal for product changeovers on a line, allowing you to dial back the stroke precisely without adding external stops.
For an exact ISO 15552 replacement match, verify the 32mm bore, 130mm stroke, 40mm adjustment, PT port thread, and standard carbon steel rod without a magnet. Since the nominal stroke is 130mm, standard internal air cushions handle end-deceleration, but always use an external guide for side-load stability. Remember that the adjuster only sets the travel end; for true load-holding without live air pressure, select an AirTAC SAIL or BSAI series cylinder.
Quick checklist
The rear adjuster screw acts as a mechanical stop that shortens the effective travel. For this model, you can trim the 130mm nominal stroke back by up to 40mm, giving an adjustable usable window of 90-130mm.
At its maximum 1.0 MPa pressure, it can deliver up to 82 kgf.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.