
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X130-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 130mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X130-50 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a nominal 130 mm stroke that can be dialed back by up to 50 mm, creating a usable travel window of 80 to 130 mm. This on-machine fine-tuning capability eliminates the need to swap cylinders or bolt on external stops during product changeovers.
The extruded aluminum barrel includes sensor grooves on both sides for flexible switch mounting. It uses a 12 mm carbon steel rod with an M10x1.25 thread, which handles moderate side loads well, though long unsupported travel still requires an external guide. The rear adjuster acts strictly as a travel stop and works alongside the variable air cushions at both ends to decelerate the piston. It does not hold the load without live air pressure; for fail-safe load holding, consider the SAIL or BSAI series.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X130-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 130 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×130 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact end-stop from 80 to 130 mm during format changes on a packaging line without swapping out the entire actuator.
Fine-tune the retract position at commissioning to perfect the picking angle, avoiding the cost of custom spacers or machined stops.
Use the 50 mm adjustment range to accommodate multiple part sizes on a single fixture, altering the effective stroke on the fly.
Choose this 32 mm bore model when your application requires precise end-position tuning within an 80 to 130 mm travel window. The integrated rear screw stopper is ideal for variable end stops and machine setup, whereas a fixed-stroke SAI cylinder is better for repetitive single-cycle tasks.
When replacing an ISO 15552 cylinder, match the 32 mm bore, 130 mm stroke, 50 mm adjustment range, PT tapered port thread, and carbon steel rod. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options, omitting the FB, CA, CB, and CR mounts. Since this cylinder lacks the -S magnet option, it cannot host CMSE reed or DMSE electronic sensors without modification. Because the 130 mm stroke exceeds 300 mm, standard side-load guidance is less critical, but always ensure proper alignment to prevent rod binding.
Quick checklist
It features a rear adjusting screw that allows you to shorten the effective stroke by up to 50 mm. This creates a usable travel window of 80 to 130 mm, letting you fine-tune the end position without changing the cylinder.
It can reach a maximum of 82 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.