Airtac Adjustable Cylinder SAIJ32 SAIJ32X130-75S
The AirTAC Airtac Adjustable Cylinder SAIJ32 SAIJ32X130-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 130mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke130 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X130-75S
The AirTAC SAIJ32X130-75-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, providing a usable travel window of 55 to 130 mm. Built with a carbon steel piston rod and a PT tapered port, it delivers 402 N of push force at 0.5 MPa. The integrated magnet enables position sensing via CMSE reed or DMSE electronic switches.
This adjustable-stroke design allows precise end-position tuning during commissioning without swapping the cylinder or adding external stops. The rear adjuster acts purely as a travel stop and does not hold the load without live air pressure. It uses a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and omits FB, CA, CB, and CR options.
Airtac Adjustable Cylinder SAIJ32 SAIJ32X130-75S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X130-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 130 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X130-75S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×130 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X130-75S Is Used
Variable End-Stop Tuning
Dial in the exact retract distance between 55 and 130 mm during machine setup to accommodate different product sizes without changing hardware.
Changeover Adjustment
Quickly reposition the external stopper screw on the rear of the cylinder to adapt the stroke for new part runs on a packaging line.
Sensor-Ready Positioning
Leverage the built-in magnet with DMSE solid-state sensors to confirm end-of-stroke travel across the adjusted 75 mm range.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X130-75S the Right Cylinder?
Choose this 32 mm bore when you need 402 N push force at 0.5 MPa and significant stroke variability. If your application requires less travel adjustment, a smaller adjuster code saves space, while stepping up to a 40 mm bore yields 628 N of push force. The SAIJ32X130-75-S is dimensionally interchangeable per ISO 15552, featuring a PT port, carbon steel rod, and an -S magnet for CMSE/DMSE sensors. For load-holding without live air, use a SAIL or BSAI cylinder instead of relying on the adjuster.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32X130-75S FAQ
The rear adjuster screw lets you shorten the effective stroke by up to 75 mm, creating a usable travel window of 55 to 130 mm. It functions as a mechanical stop for end-position tuning and does not lock or hold the load without continuous air pressure.
At 0.5 MPa operating pressure, it provides 402 N of push force and 345 N of pull force. At 0.7 MPa, the push force increases to 563 N.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X130-75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.