
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X135-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 135mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X135-100-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, enabling a usable travel window of 35-135 mm from its 135 mm nominal stroke.
Because this configuration includes a magnet (-S), it directly supports AirTAC CMSE reed and DMSE electronic solid-state sensors without requiring external mounting hardware. The carbon steel piston rod features an M10x1.25 thread, and the cylinder uses a PT tapered port thread. The rear adjuster acts purely as a mechanical stop to fine-tune the retract position during commissioning; it is not a lock and cannot hold a load without continuous live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X135-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 135 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×135 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract position from 35 to 135 mm during machine setup, providing precise end-position tuning without fabricating custom external stopper blocks.
Quickly adapt a packaging or handling line to different product lengths by adjusting the rear stopper screw, cutting changeover time significantly.
Leverage the integrated magnet and dual sensor grooves to mount CMSE or DMSE switches directly alongside the adjustable stroke for automated feedback.
The 100 mm adjustment range is perfect for product changeovers on a packaging line, allowing you to dial in the retract distance from 35 to 135 mm without swapping out the cylinder or adding external mechanical stops. If your process requires less force, stepping down is not an option in this series, but if you need greater thrust, a 40 mm bore provides 628 N.
For ISO 15552 replacement matching, verify the 32 mm bore, 135 mm stroke, up to 100 mm adjustment, PT port thread, and the -S magnet. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options, deliberately omitting FB, CA, CB, and CR. Remember that the rear adjuster and the variable air cushions only decelerate the travel end; for true load-holding without live air, consider the SAIL or BSAI series.
Quick checklist
If you operate at 0.7 MPa, the push force increases to 563 N.
The rear adjuster screw lets you mechanically shorten the effective stroke by up to 100 mm. This creates a usable travel window between 35 and 135 mm, allowing you to fine-tune the retract end position during commissioning without replacing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.