
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X135-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 135mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X135-10-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It features a 32mm bore and a 135mm nominal stroke that can be dialed back by up to 10mm, providing a precise 125-135mm usable travel window for commissioning without external stops.
It uses a G1/8 PT port, 30-800mm/s speeds, and supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X135-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 135 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×135 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 125-135mm travel window during product size changeovers without swapping the cylinder or adding external mechanical stops.
Use the 10mm rear adjustment screw to precisely set the retract end-position during machine commissioning for accurate part placement.
Leverage the built-in magnet and dual sensor grooves to mount CMSE or DMSE switches exactly where needed along the adjusted travel path.
The rear adjuster screw acts purely as a travel stop for fine-tuning and deceleration—it does not hold the load without live air. For position holding, select the SAIL or BSAI series. This unit is dimensionally interchangeable per ISO 15552.
Quick checklist
The 135mm nominal stroke can be adjusted back by up to 10mm, creating a 125-135mm usable travel window.
No, the rear adjuster is a travel stop for end-position tuning, not a lock. The cylinder cannot hold loads without live air. For fail-safe load holding, use the SAIL or BSAI series.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.