
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X135-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 135mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X135-20-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. By turning the rear screw, you achieve a usable travel window of 115 to 135mm, enabling precise end-position tuning without external stops.
This -S variant includes a magnet for position sensing via AirTAC CMSE reed or DMSE electronic switches fitted into the dual sensor grooves. The extruded aluminum barrel maintains standard ISO 15552 mounting dimensions, while the adjustable stopper simply acts as a travel limit and does not lock the load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X135-20S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 135 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×135 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retraction point within the 115-135mm window during machine commissioning without adding external mechanical stops.
Quickly adjust the cylinder's effective stroke on packaging lines when handling different product sizes, minimizing downtime.
Leverage the internal magnet with DMSE electronic sensors to confirm stroke endpoints alongside the mechanical rear stopper adjustment.
The PT tapered port thread ensures a tight pneumatic seal, and the adjustable nature of this cylinder eliminates the need to physically swap components when dialing in a 115-135mm stroke. Because the rear adjuster is a stop rather than a lock, load-holding without live air requires a SAIL pneumatic lock or external rod lock.
For ISO 15552 replacement matching, verify the 32mm bore, 135mm nominal stroke, 20mm adjustment range, PT port thread, and the -S magnet option. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2. Since the 135mm stroke is relatively short, side-load stress is minimal, but external guides are still recommended for heavy lateral loads.
Quick checklist
The rear adjuster screw allows you to shorten the effective stroke by up to 20mm. This provides a usable travel window of 115 to 135mm, letting you fine-tune the end position at commissioning without changing the cylinder.
The maximum push force is 724N at 0.9 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.