
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X135-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 135mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X135-30 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 135mm nominal stroke that can be dialed back by up to 30mm, giving you a precise 105-135mm usable travel window for commissioning without external stops. As a compact 32mm bore class actuator, it delivers 402N of pull force at 0.5MPa and uses a G1/8 port.
The carbon steel piston rod features an M10x1.25 thread, providing a robust interface for standard fittings. The extruded aluminum barrel includes sensor grooves on both sides, allowing you to easily mount CMSE reed or DMSE electronic switches if position feedback is later required. The rear adjustment screw acts purely as a mechanical stop to set the retract position and does not lock the load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X135-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 135 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×135 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 105-135mm retract position during machine commissioning to perfect pick-and-place movements without adding external stopper blocks.
Quickly adapt the cylinder travel window on a packaging line when running a slightly shorter product format, saving downtime on physical cylinder swaps.
Choose this 32mm adjustable model when you need fine end-position tuning during machine setup or product changeover, avoiding the need to physically swap cylinders for different travel lengths. If your application requires higher thrust, stepping up to the 40mm bore yields 528N of pull force at 0.5MPa, but the 32mm offers a lighter footprint. For fixed travel requirements without the adjuster, the standard SAI series is the direct alternative.
This SAIJ32X135-30 is dimensionally interchangeable per ISO 15552 standards. Configuration details include a 135mm stroke, 30mm adjustment range, PT tapered port threads, and mounting options limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2. Since it lacks a lock mechanism, load-holding without live pressure requires a SAIL or BSAI cylinder. Because the stroke is under 300mm, side-load concerns are minimal, but always ensure axial alignment.
Quick checklist
It features a rear mechanical adjuster that lets you shorten the effective travel by up to 30mm. This creates a 105-135mm usable stroke window, allowing you to fine-tune the end position at commissioning without replacing the cylinder.
The standard speed range for this bore size is 30-800mm/s, supported by a 27mm air cushion at both ends.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.