
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X135-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 135mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X135-30-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the travel window from 105 to 135 mm without swapping out the unit. The integrated -S magnet enables position tracking using AirTAC CMSE reed or DMSE solid-state sensors housed in the dual-side extruded barrel grooves.
Because the rear stopper acts purely as a travel end-limit and deceleration aid alongside the adjustable air cushions, it will not hold a load dynamically without live air pressure. For applications requiring true load-holding without continuous pressure, AirTAC SAIL or BSAI series cylinders are the correct alternatives.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X135-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 135 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×135 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact end-stop between 105 and 135 mm during product size changes on a packaging line without replacing the cylinder.
Fine-tune the retract stroke at commissioning to perfect the seating of a small part, using the rear screw rather than adding external shims.
If your setup demands greater thrust, stepping up to the 40 mm bore yields 628 N. The 30 mm adjustment range is ideal for product changeovers, allowing operators to dial in the exact end-position at commissioning rather than machining external stops. It shares the exact ISO 15552 mounting dimensions of standard cylinders, utilizing a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2.
With a 135 mm stroke, this unit operates safely within the 30-800 mm/s speed range. If your mechanism involves heavy off-center loads, note that the 12 mm rod and M10x1.25 thread handle moderate side loads, but an external guide rail is still recommended for maximum stability.
Quick checklist
The rear adjuster screw lets you shorten the effective travel by up to 30 mm, creating a usable stroke window of 105 to 135 mm. This allows precise end-position tuning at commissioning without external stops.
The maximum thrust is 82 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.