verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32X135-40

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X135-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 135mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke135 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$67.22 $74.72Save 10% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X135-40

The AirTAC SAIJ32X135-40 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to dial back the 135 mm nominal travel by up to 40 mm. This creates a precise 95-135 mm usable window, allowing fine end-position tuning at commissioning without swapping the cylinder or adding external stops.

The bore uses a 12 mm carbon steel rod with an M10x1.25 thread, PT tapered ports, and 27 mm cushions at both ends. You can mount it using the SAIJ subset of Basic, FA, LB, TC, FTC, TCM1, or TCM2 brackets. Note that the rear adjuster acts as a travel stop for deceleration, not a lock; it will not hold a load without live air.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X135-40 Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32X135-40
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke135 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X135-40

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×135Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X135-40 Is Used

tune

Product Changeovers

Dial in the 95-135 mm travel window during format changes on packaging lines, using the rear screw to set new end positions rapidly without changing hardware.

precision_manufacturing

End-Stop Calibration

Fine-tune the retraction point during machine commissioning to avoid mechanical crashes, relying on the 40 mm adjustment range for exact positioning.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X135-40 the Right Cylinder?

If you need greater thrust, stepping up to the 40 mm bore yields 628 N at the same pressure. The adjustable stroke is selected over a fixed SAI when you need variable end-stops for product-size changeovers. For load-holding without live pressure, consider a SAIL or BSAI cylinder instead. To match this ISO 15552 replacement exactly, specify: 32 mm bore, 135 mm stroke, 40 mm adjustment, PT ports, and your required mounting.

With a 135 mm stroke, the 12 mm rod handles standard loads well, but always ensure external guiding for any off-center loads to prevent premature seal wear.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X135-40 FAQ

It features a rear adjusting screw that lets you shorten the effective stroke by up to 40 mm. This provides a usable travel window of 95-135 mm, allowing you to set the exact end position without external stops.

At 0.7 MPa, the push force increases to 563 N.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X135-40

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32X135-40 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.