
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X135-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 135mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
Its defining feature is a 75mm adjustment range that creates a highly flexible 60-135mm usable travel window. This allows you to dial in the exact retract end-position during commissioning without swapping hardware.
Unlike a fixed-stroke SAI, this model uses an external rear stopper screw to trim the stroke. The adjuster functions purely as a travel stop and does not lock the load without live air pressure. It features a carbon steel piston rod, a PT tapered port thread, and an extruded aluminum barrel with sensor grooves on both sides for straightforward position feedback.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X135-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 135 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×135 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly fine-tune the retract end-position during product size changeovers on a packaging line, utilizing the 60-135mm travel window without adding external stops.
Dial in the exact end-of-stroke location for light-duty pressing or locating tasks, relying on the rear adjuster screw to set the precise 75mm trim range.
Leverage the dual-side sensor grooves on the aluminum profile to mount CMSE or DMSE switches exactly where needed across the adjusted travel window.
Choose this 32mm bore when you need precise retract positioning within a 60-135mm window, avoiding the need for external stop blocks during machine setup or product changeover. For load-holding without continuous air pressure, this cylinder is insufficient; you should explore the SAIL (air-released lock) or BSAI (clamp-lock) series instead.
To match this ISO 15552 dimensionally interchangeable cylinder, verify the 32mm bore, 135mm nominal stroke, 75mm adjustment code, PT port thread, and your required mounting set (Basic, FA, LB, TC, FTC, TCM1, or TCM2). Because the nominal stroke is 135mm, the 12mm rod handles side loads adequately, but always guide the load externally to prevent binding.
Quick checklist
At its maximum 1.0 MPa pressure, it delivers up to 82 kgf.
The rear adjuster screw acts as a mechanical stop that lets you trim the effective stroke back by up to 75mm. This creates a usable travel window of 60-135mm from the 135mm nominal stroke, allowing precise end-position tuning without replacing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.