
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X135-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 135mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X135-75-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It features a 135 mm nominal stroke that can be dialed back by up to 75 mm, providing a versatile 60-135 mm usable travel window for precise end-position tuning during machine commissioning.
This adjustable-stroke model includes a magnet (-S) for use with AirTAC CMSE reed and DMSE electronic sensors. The rear adjuster functions strictly as a travel stop to set the retraction end-point without requiring external stops, but it does not lock the load without live air pressure. It supports the standard SAIJ mounting set, including Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X135-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 135 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×135 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the retraction end-position within the 60-135 mm window during initial setup to dial in exact stopping points without machining external spacers.
Quickly adjust the stroke by up to 75 mm on packaging lines when switching to different product sizes, minimizing downtime between runs.
Select this 32 mm bore cylinder when an application requires variable end-stops or frequent product-size changeovers, as the 75 mm adjustment range allows you to trim the 135 mm stroke down to 60 mm without swapping the cylinder. Since the 135 mm stroke is under 300 mm, side-load stress on the 12 mm carbon steel rod is moderate, though an external guide is still recommended for optimal longevity.
For an exact ISO 15552 replacement match, ensure the 32 mm bore, 135 mm nominal stroke, 75 mm adjustment code, PT port thread, and desired mounting accessory are specified. Because this is an adjustable-stroke profile cylinder rather than a fixed-stroke SAI, it omits the FB, CA, CB, and CR mounting options. Remember that the rear stopper only decelerates and sets the travel end; for load-holding without live air pressure, consider an AirTAC SAIL or BSAI cylinder.
Quick checklist
The rear adjusting screw acts as an external stopper that lets you shorten the effective stroke by up to 75 mm. This creates a usable travel window of 60 to 135 mm, allowing you to set the exact retraction end-position at commissioning without changing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.