
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X140-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 140mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X140-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the travel window between 130 and 140 mm. The carbon steel piston rod features an M10x1.25 thread, providing a robust interface for mounting attachments.
Unlike a fixed-stroke SAI cylinder, this model lets you dial in the retract end-position at commissioning without adding external stops. The rear adjuster acts purely as a travel stop and works alongside the 27 mm air cushion to decelerate the load, but it does not hold the load without live air pressure. The extruded aluminum barrel includes sensor grooves on both sides, ready for CMSE reed or DMSE electronic switches if a magnet is specified later.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X140-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 140 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×140 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract position within a 130-140 mm window during machine commissioning without swapping cylinders.
Quickly adjust the stroke by up to 10 mm on a packaging line when processing slightly different package sizes.
Fine-tune the final seating position of lightweight 32 mm bore components using the rear stopper screw.
Choose this 32 mm bore adjustable cylinder when your machine setup requires variable end-stops within a 130-140 mm travel range. The SAIJ series uses a specific mounting subset including Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR brackets.
For an exact ISO 15552 replacement match, verify the 140 mm stroke, 10 mm adjustment range, PT tapered port threads, and standard carbon steel rod material. Because this is a standard 140 mm stroke, no external side-load guide is strictly required, but always ensure the load is supported to prevent rod binding. Remember that for load-holding without live pressure, you must look to the SAIL or BSAI series, as the adjuster here is not a lock.
Quick checklist
At the maximum operating pressure of 1.0 MPa, it can deliver up to 82 kgf.
The rear adjuster screw lets you shorten the 140 mm nominal stroke by up to 10 mm, creating a usable travel window of 130 to 140 mm. This stopper sets the end position but does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.