
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X140-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 140mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X140-100 is a double-acting ISO 15552 profile cylinder featuring a rear mechanical adjuster that allows you to shorten the effective travel. With a 140 mm nominal stroke and a 100 mm adjustment range, this unit provides a wide usable travel window of 40 to 140 mm, letting you dial in the exact end position without adding external stops.
This 32 mm bore model features a 12 mm carbon steel rod and M10x1.25 rod thread, designed to handle moderate side loads. The extruded aluminum barrel includes sensor grooves on both sides for straightforward detection integration. It uses a PT tapered port thread and offers a speed range of 30-800 mm/s, supported by variable air cushions at both ends that decelerate the piston smoothly.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X140-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 140 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×140 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retraction point between 40 and 140 mm for multi-format assembly stations without changing the cylinder.
Rapidly adjust the stroke length during product size transitions to accommodate different part widths on the fly.
Apply up to 724 N of clamping force at 0.9 MPa while fine-tuning the exact contact position to avoid crushing delicate workpieces.
Choose this 100 mm adjustable version when you need extreme flexibility over the travel distance at machine commissioning or during frequent product changeovers. It allows you to set variable end-stops on the fly, unlike a fixed-stroke SAI cylinder.
When matching ISO 15552 replacements, verify the 32 mm bore, 140 mm stroke, 100 mm adjustment range, PT port thread, and the required mounting set (Basic, FA, LB, TC, FTC, TCM1, or TCM2). Because this unit lacks a magnet, position sensing requires adding a separate external switch. Note that the rear adjuster acts only as a travel stop and does not hold the load without live air pressure; for true load-holding, consider the SAIL or BSAI series.
Quick checklist
At the maximum operating pressure of 1.0 MPa, it delivers up to 82 kgf.
The rear adjuster acts as a mechanical stopper that lets you trim the effective stroke back by up to 100 mm. This creates a usable travel window of 40 to 140 mm, allowing precise end-position tuning at commissioning without swapping the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.