
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X140-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 140mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X140-10-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It features a carbon steel piston rod and a PT tapered port. By turning the rear adjustment screw, you can fine-tune the effective travel within a 130-140 mm window, providing precise end-positioning without adding external stops.
The integrated -S magnet enables position feedback via CMSE reed or DMSE solid-state switches fitted into the dual-side sensor grooves on the extruded aluminum barrel.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X140-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 140 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×140 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 130-140 mm travel window during product size transitions to set new retract stops without replacing hardware.
Fine-tune the final retract position on assembly presses within a 10 mm range to correct for mechanical wear.
Leverage the built-in magnet and CMSE / DMSE switches to verify the adjusted end position during automated setup.
If your process requires greater clamping power, stepping up to the 40 mm bore increases output to 628 N. The 10 mm rear adjuster is ideal for product changeovers, allowing you to shift the end position dynamically rather than swapping a fixed-stroke SAI cylinder.
Remember that the rear adjuster acts only as a travel stop and does not hold the load without live air pressure; for true load-holding, consider an external rod lock or the SAIL series. This cylinder is dimensionally interchangeable per ISO 15552, using the reduced SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2). For any stroke of 300 mm or more, an external guide is recommended to handle side loads.
Quick checklist
The standard operating speed range is 30-800 mm/s, and it operates safely up to 1.0 MPa.
The rear adjuster acts as a mechanical stop that shortens the 140 mm nominal stroke by up to 10 mm, giving a usable travel window of 130-140 mm for fine-tuning at commissioning.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.