
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X140-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 140mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X140-40-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. By turning the external stopper screw, you can fine-tune the effective travel down from the 140 mm nominal stroke, creating a 100-140 mm usable window for precise end-position tuning.
This adjustable-stroke design eliminates the need to swap cylinders or bolt on external stops during machine changeovers. The extruded aluminum barrel includes sensor grooves on both sides for direct mounting of CMSE reed and DMSE electronic switches. The carbon steel piston rod uses an M10x1.25 thread, and the rear adjuster acts purely as a travel stop, meaning it will not hold a load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X140-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 140 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×140 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the retract stop from 140 mm down to 100 mm instantly when switching to a shorter package format on a packaging line.
Use the -S magnet with DMSE electronic switches to confirm exact end positions after trimming the stroke window.
Fine-tune the end-of-stroke position during setup without machining external hard stops or changing the cylinder.
The 40 mm adjustment window is ideal for product size changeovers on a line. If you need more force, stepping up to the 40 mm bore yields 628 N at 0.5 MPa. Because the stroke is under 300 mm, side-load stress on the 12 mm rod is moderate, but an external guide is still recommended for heavy lateral loads.
To replace an ISO 15552 cylinder, match the 32 mm bore, 140 mm stroke, and 40 mm adjustment range. This unit uses PT tapered ports, a carbon steel rod, and includes the -S magnet for CMSE/DMSE sensors. It supports the SAIJ mounting subset (Basic, FA, LB, TC, FTC, TCM1, TCM2), omitting FB, CA, CB, and CR brackets. For load-holding without live air, use an external rod lock or pilot-operated check valve, or select the SAIL or BSAI series instead.
Quick checklist
If you increase the operating pressure to 0.7 MPa, the push force rises to 563 N.
The rear adjuster screw lets you mechanically shorten the retract stroke by up to 40 mm, giving a usable travel window of 100 to 140 mm. The adjuster is a mechanical stop only and does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.