verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32X140-50

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X140-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 140mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke140 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$67.22 $74.72Save 10% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X140-50

The AirTAC SAIJ32X140-50 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to trim the effective travel back by up to 50 mm. This creates a highly flexible 90-140 mm usable stroke window, letting you dial in the exact retract position without swapping hardware.

Because the rear adjuster acts purely as a mechanical stop, it does not hold the load without live air pressure. The extruded aluminum barrel includes sensor grooves on both sides for CMSE reed or DMSE electronic switches, though this specific SKU is not magnetized. It uses the standard SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and PT tapered ports.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X140-50 Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32X140-50
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke140 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X140-50

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×140Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X140-50 Is Used

tune

Machine Changeovers

Dial in the 90-140 mm retract position during product size changes without machining new stop blocks.

settings_input_component

End-Position Trimming

Fine-tune the final retract point during commissioning to compensate for mechanical tolerance stack-up.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X140-50 the Right Cylinder?

If you need greater thrust, stepping up to the 40 mm bore yields 628 N at the same pressure. The 50 mm adjustment range is particularly useful for machine setups requiring frequent product-size changeovers, replacing the need for fixed external stops or a standard SAI cylinder.

For load-holding without continuous air pressure, this cylinder is not suitable as the rear adjuster and air cushions only decelerate the travel end; you should instead look at the SAIL or BSAI series. When integrating this model, ensure your setup matches the PT port thread and the ISO 15552 mounting interface.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X140-50 FAQ

It features a rear adjusting screw that acts as a mechanical stop, allowing you to shorten the 140 mm nominal stroke by up to 50 mm. This provides a usable travel window of 90-140 mm, which can be fine-tuned during commissioning.

At the maximum 1.0 MPa pressure, it can deliver up to 82 kgf.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X140-50

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32X140-50 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.