
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X140-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 140mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X140-75 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the effective travel. With a nominal 140 mm stroke and a 75 mm adjustment range, this model provides a highly versatile 65-140 mm usable travel window. It delivers 402 Newtons of push force and 345 Newtons of pull force at 0.5 MPa, making it well-suited for lighter-duty positioning tasks.
This 32 mm bore cylinder uses a PT G1/8 port and a 12 mm carbon steel rod with an M10x1.25 thread. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE reed or DMSE electronic switches. The rear adjuster acts purely as a mechanical stop to set the retracted end-position and must not be confused with a load-holding lock; for dead-end clamping without live air pressure, consider the SAIL or BSAI series.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X140-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 140 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×140 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retraction point during product size changes on a packaging line without physically replacing the cylinder or adding external stopper blocks.
Fine-tune the 65-140 mm travel window at commissioning to perfectly time the mechanical end-position against a hard stop or fixture.
Adjust the travel end-point to align precisely with DMSE electronic or CMSE reed sensors mounted in the dual-side barrel grooves.
Choose this 32 mm bore adjustable model when your assembly requires variable end-stops or frequent product changeovers, as the 75 mm adjustment range allows rapid commissioning without swapping the physical cylinder. If your application demands greater thrust, stepping up to the 40 mm bore yields 628 Newtons of push force at 0.5 MPa.
When replacing an ISO 15552 cylinder, match the 32 mm bore, 140 mm stroke, PT G1/8 port, and mounting interface. The SAIJ supports a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR styles. Because the 140 mm stroke is below the 300 mm threshold, side-load concerns are minimal, though the 12 mm rod still handles lateral forces better than smaller variants.
Quick checklist
At a 0.5 MPa operating pressure, this 32 mm bore cylinder provides 402 Newtons of push force and 345 Newtons of pull force. At the maximum 1.0 MPa pressure, it can deliver up to 82 kgf.
The rear adjuster screw acts as a mechanical stop that lets you shorten the nominal 140 mm stroke by up to 75 mm, providing a usable travel window of 65 to 140 mm. It sets the end-position but does not lock or hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.