verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32X145-100

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X145-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 145mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke145 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$67.22 $74.72Save 10% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X145-100

The AirTAC SAIJ32X145-100 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a usable travel window of 45 to 145 mm, allowing you to dial in the exact retract end-position during commissioning without swapping hardware.

This model utilizes an extruded aluminum barrel with sensor grooves on both sides, accepting CMSE reed or DMSE electronic switches if a magnet is added later. The rear stopper acts solely as a travel limit and does not hold the load without live air pressure. Mounting options include the standard SAIJ subset: Basic, FA, LB, TC, FTC, TCM1, and TCM2.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X145-100 Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32X145-100
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke145 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X145-100

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×145Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X145-100 Is Used

tune

Product Changeover

Quickly adjust the retract distance by up to 100 mm when switching between product sizes on a packaging line.

precision_manufacturing

End-Position Tuning

Fine-tune the final retract position during machine commissioning without machining new stopper blocks.

settings_input_component

Variable End Stops

Dial in the exact 45 to 145 mm travel window required for delicate picking and placing operations.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X145-100 the Right Cylinder?

Choose this 32 mm bore when an application requires precise end-position tuning over a wide 45-145 mm range, rather than installing fixed external stops. For load-holding without continuous air supply, select a SAIL or BSAI cylinder instead, as this adjuster is not a locking mechanism.

Because the nominal stroke is 145 mm, side-load stress is minimal, but always ensure the 12 mm rod and M10x1.25 thread are properly aligned with your load guide. To match this exact ISO 15552 replacement, verify the 32 mm bore, 145 mm stroke, 100 mm adjustment range, PT port thread, and your required mounting bracket.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X145-100 FAQ

The rear adjuster screw allows you to shorten the effective stroke by up to 100 mm, creating a usable travel window of 45 to 145 mm. It acts as a physical stop for the retract end-position and does not lock the load without air pressure.

At the maximum 1.0 MPa pressure, the push force reaches 801 N.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X145-100

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32X145-100 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.