verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32X145-100S

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X145-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 145mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke145 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$70.01 $77.51Save 9% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X145-100S

The AirTAC SAIJ32X145-100-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 145 mm stroke that can be fine-tuned down by up to 100 mm, creating a highly versatile 45-145 mm usable travel window.

This model features a carbon steel piston rod and PT tapered port threads. The extruded aluminum barrel includes sensor grooves on both sides, and the integrated -S magnet enables position detection with AirTAC CMSE reed or DMSE electronic solid-state switches. It utilizes variable air cushions at both ends to decelerate the load smoothly.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X145-100S Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32X145-100S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke145 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X145-100S

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×145Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X145-100S Is Used

tune

Product Changeover

Dial in the 45-145 mm travel window rapidly during format size changes on packaging lines without replacing the cylinder.

settings_input_component

Machine Setup

Fine-tune the exact end-of-stroke position during commissioning using the rear stopper to avoid adding external shims.

precision_manufacturing

Variable End Stops

Adjust the retract position on the fly for automated test fixtures requiring flexible material contact points.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X145-100S the Right Cylinder?

Choose this 32 mm bore actuator when your setup demands a wide adjustable end-stop range rather than a fixed 145 mm stroke, allowing precise commissioning or rapid product changeover. Since the nominal stroke is under 300 mm, side-load risks are moderate, but external guiding is still advised for heavy off-center loads.

The rear adjuster acts strictly as a mechanical stop to set the travel limit and cannot hold a load without continuous air pressure. For load-holding requirements without live air, consider an AirTAC SAIL pneumatic lock, a BSAI clamp-lock cylinder, or an external pilot-operated check valve. This profile cylinder is dimensionally interchangeable per ISO 15552 and supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X145-100S FAQ

At 0.7 MPa, the push force increases to 563 N.

The rear adjusting screw acts as a mechanical stop that shortens the effective stroke by up to 100 mm. This creates a usable travel window of 45-145 mm, allowing you to set the exact end position without changing the cylinder.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X145-100S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32X145-100S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.