verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32X145-10S

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X145-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 145mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke145 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$70.01 $77.51Save 9% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X145-10S

The AirTAC SAIJ32X145-10-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. By turning the rear screw, you achieve a precise 135-145mm usable travel window, ideal for dialing in final end positions without external stops.

This bore uses a PT G1/8 port and includes variable air cushions at both ends to decelerate the moving load. The -S suffix indicates an integrated magnet for position sensing via AirTAC CMSE reed or DMSE electronic switches mounted in the dual-side sensor grooves. It supports a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X145-10S Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32X145-10S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke145 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X145-10S

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×145Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X145-10S Is Used

tune

Machine Changeover

Quickly fine-tune the 135-145mm travel window during product size changes on a packaging line without swapping hardware.

precision_manufacturing

End-Stop Calibration

Dial in the exact retracted position during commissioning to prevent crashes and ensure precise tooling alignment.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X145-10S the Right Cylinder?

Select this 32mm bore when you need exact end-position tuning at commissioning or during product changeovers, avoiding the need to swap cylinders or bolt on external stoppers. Conversely, if you need less force, a smaller option may be required. The rear adjuster acts solely as a travel stop and does not hold the load without live air; for true load-holding, consider an external rod lock or the SAIL series.

For a direct ISO 15552 replacement match, verify the 32mm bore, 145mm nominal stroke, 10mm adjustment range, PT G1/8 port, and the -S magnet option. Because this cylinder features a 145mm stroke, ensure the 12mm rod is adequately supported by external guides to prevent excessive side-loading and premature seal wear.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X145-10S FAQ

At 0.7 MPa, the push force increases to 563N.

The rear adjuster screw allows you to trim the effective travel back by up to 10mm, creating a 135-145mm usable stroke window. It functions as a hard stop for end-position tuning and is not a locking device.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X145-10S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32X145-10S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.