
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X145-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 145mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
By turning the external stopper screw, you can shorten the effective travel, creating a usable stroke window of 125-145 mm for precise commissioning without swapping hardware. It features a standard carbon steel rod and a PT tapered port thread.
Because this variant includes the -S magnet, it supports direct mounting of AirTAC CMSE reed and DMSE solid-state sensors along the dual-side sensor grooves. The rear adjuster functions purely as a travel stop to set the end position, meaning it will not hold a load dynamically without continuous air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X145-20S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 145 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×145 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 125 to 145 mm end-position during product size changes without adding external stops.
Fine-tune the retract stroke at commissioning using the built-in rear screw to absorb mechanical tolerances.
Provides adjustable physical stops for varying package dimensions on automated conveyor lines.
Choose this 32mm bore when you need lighter thrust forces up to 402N at 0.5 MPa, stepping down from a 40mm bore that yields 628N. The adjustable stroke is ideal for machine setups requiring variable end-stops during product changeovers, rather than relying on a fixed-stroke SAI cylinder. To replace an ISO 15552 cylinder, match the 32mm bore, 145mm stroke, 20mm adjustment, PT G1/8 port, and -S magnet.
For any application needing fail-safe load holding without live air, this cylinder's stopper cannot act as a brake; instead, explore AirTAC SAIL or BSAI lock models. The 12mm rod and M10x1.25 thread handle moderate side loads, but always support long, unsupported loads with an external guide.
Quick checklist
The rear adjuster acts as a stopper that lets you trim the effective travel back by up to 20mm, creating a usable stroke window of 125 to 145mm. It sets the travel end but does not lock the load without air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.