verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32X145-30S

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X145-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 145mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke145 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$70.01 $77.51Save 9% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X145-30S

The AirTAC SAIJ32X145-30-S is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a usable travel window of 115-145 mm, allowing you to dial back the 145 mm nominal stroke by up to 30 mm during commissioning.

Equipped with a -S magnet, this unit supports AirTAC CMSE reed and DMSE solid-state sensors housed within the dual-side barrel grooves. It features a PT tapered G1/8 port, a 12 mm carbon steel rod, and 27 mm air cushions at both ends. The adjuster acts purely as a travel stop for end-position tuning, meaning it will not hold a load without live air pressure.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X145-30S Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32X145-30S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke145 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X145-30S

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×145Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X145-30S Is Used

tune

Changeover Tuning

Dial in the exact 115-145 mm end position during machine changeovers without physically replacing the cylinder or shimming external stops.

settings_input_component

Sensor-Ready Positioning

Leverage the built-in magnet for CMSE or DMSE switches to confirm travel endpoints across the adjusted stroke window.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X145-30S the Right Cylinder?

If your process demands higher force, step up to the 40 mm bore, which yields 628 N at 0.5 MPa. The 30 mm adjustment window is ideal for product changeovers on a shared fixture.

For ISO 15552 interchangeability, match the 32 mm bore, 145 mm stroke, 30 mm adjuster, PT G1/8 port, and -S magnet. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2. Since the stroke is under 300 mm, side-load stress on the 12 mm rod thread is minimal, though an external guide remains recommended for heavy lateral loads. To hold a load without live air, use an external rod lock or pilot-operated check valve, as the rear adjuster is not a brake.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X145-30S FAQ

The rear adjuster screw acts as a mechanical stop that lets you shorten the 145 mm nominal stroke by up to 30 mm, creating a 115-145 mm travel window. It fine-tunes the retract end position at commissioning but does not lock the load without live air.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X145-30S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32X145-30S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.