
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X145-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 145mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X145-50 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 145 mm stroke that can be dialed back by up to 50 mm, yielding a precise 95-145 mm usable travel window for exact end-position tuning.
This extruded aluminum profile cylinder features a PT tapered port and a 12 mm carbon steel rod. The rear adjuster acts purely as a mechanical stop to fine-tune the retract position during commissioning; it does not lock the load without live air pressure. Mounting options include the standard SAIJ subset of Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X145-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 145 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×145 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 95-145 mm travel window during product size transitions without physically swapping the actuator or adding external stopper blocks.
Fine-tune the retract stop at commissioning to absorb mechanical tolerances, ensuring precise positioning using the rear adjustment screw.
Set exact retraction depths for varying component heights on a single line, leveraging the 50 mm adjustment range on the fly.
Because the 145 mm stroke is under 300 mm, side-load stress on the 12 mm rod is minimal, though external guides remain recommended for heavy loads.
The adjustable stroke is ideal for machine changeovers, functioning differently from a fixed SAI cylinder by allowing on-the-fly retraction tuning. To match this ISO 15552 dimensionally interchangeable cylinder, specify: 32 mm bore, 145 mm stroke, 50 mm adjustment, PT port thread, carbon steel rod, no magnet, and the required mounting style. For load-holding without continuous air, consider an external pilot-operated check valve or the SAIL lock variant.
Quick checklist
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the effective stroke from its 145 mm nominal length down to 95 mm. This stop only sets the travel end and does not hold the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.