
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X145-50S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 145mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X145-50-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It features a 32 mm bore and a 145 mm nominal stroke, yielding a usable travel window of 95 to 145 mm. This built-in adjustability allows you to dial in the retract end-position precisely during commissioning without swapping hardware.
This variant includes a magnet for CMSE and DMSE sensors and uses a PT tapered port thread. The extruded aluminum barrel provides sensor grooves on both sides. Unlike fixed-stroke SAI units, this model trims travel via an external stopper screw, while the mounting interface remains dimensionally interchangeable per ISO 15552 standards.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X145-50S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 145 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×145 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the retract distance within the 95-145 mm window during machine commissioning to achieve precise positioning without adding external stopper blocks.
Quickly adjust the stroke by up to 50 mm on packaging lines when handling different product sizes, reducing downtime between production runs.
Select this 32 mm bore actuator when an application demands variable end-stops or frequent product changeovers, replacing the need for fixed SAI cylinders. Conversely, if lower friction or smaller footprint is needed, evaluate smaller bores accordingly.
For exact ISO 15552 replacement matching, verify the 145 mm stroke, 50 mm adjustment range, PT port thread, and the -S magnet option. Because the nominal stroke is 145 mm, side-loading is minimal, but always ensure the 12 mm rod and M10x1.25 thread are aligned with external guides for optimal longevity. Note that the rear adjuster acts as a travel stop, not a lock; to hold loads without live air, consider an external rod lock or pilot-operated check valve.
Quick checklist
At the maximum pressure of 1.0 MPa, it delivers up to 82 kgf.
The rear adjuster screw allows you to shorten the effective stroke by up to 50 mm. This creates a usable travel window between 95 mm and 145 mm, enabling fine-tuning of the end position without replacing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.