
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X150-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 150mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X150-100 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a usable travel window of 50 to 150 mm, letting you dial back the nominal 150 mm stroke by up to 100 mm during commissioning.
The carbon steel piston rod uses an M10x1.25 thread, while the tapered PT G1/8 port supplies air. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting. Remember that the rear adjuster acts purely as a mechanical stop and does not hold the load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X150-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 50 to 150 mm travel window on packaging lines to accommodate different carton sizes without swapping the hardware.
Quickly adjust the stroke on automated assembly lines when switching between product families, saving setup time.
Select this 32 mm bore unit when you need precise end-position tuning without adding external stops. Choose this adjustable-stroke model over a fixed SAI cylinder when machine setups frequently change product sizes. To replace an ISO 15552 cylinder, match the 32 mm bore, 150 mm stroke, 100 mm adjustment, PT G1/8 port, and your required mounting from the Basic, FA, LB, TC, FTC, TCM1, or TCM2 set.
Because the 150 mm stroke is under 300 mm, side-load stress is minimal, though long unsupported rods still need an external guide. For load-holding without continuous air pressure, use an external rod lock or pilot-operated check valve, or explore SAIL and BSAI variants.
Quick checklist
At the maximum operating pressure of 1.0 MPa, it delivers up to 82 kgf.
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the effective travel from 150 mm down to 50 mm. It only sets the end position and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.