
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X150-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 150mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X150-100-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to dial back the nominal 150 mm travel by up to 100 mm, creating a wide 50-150 mm usable window for product changeovers.
Unlike a fixed-stroke SAI unit, this model integrates the stopper directly into the rear cap, eliminating the need to bolt on external physical stops during machine setup. The extruded aluminum barrel includes sensor grooves on both sides for mounting AirTAC CMSE reed or DMSE electronic solid-state switches, ensuring precise end-of-stroke detection across the entire adjustable range.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X150-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance during machine commissioning without swapping out the entire cylinder or adding bulky external stopper blocks.
Quickly adapt a packaging line to different package lengths by adjusting the rear screw within the 50-150 mm travel window.
Utilize the dual-side sensor grooves with DMSE electronic switches to confirm the adjusted end position accurately across the variable stroke.
The rear adjuster screw acts solely as a travel stop to fine-tune the retract distance and is not a mechanical lock. If your machine requires true fail-safe load holding without live air pressure, select the SAIL (air-released lock) or BSAI (clamp-lock) series instead.
To match this exact configuration for an ISO 15552 interchange, specify a 32 mm bore, 150 mm nominal stroke, 100 mm adjustment range, PT thread port, and a magnetic piston (-S). Because the stroke is 150 mm, the 12 mm rod and M10x1.25 thread provide adequate rigidity, but always guide the load externally to prevent binding.
Quick checklist
At 0.7 MPa, the push force increases to 563 N.
The rear adjuster screw allows you to mechanically shorten the 150 mm nominal stroke by up to 100 mm, providing a usable travel window of 50 to 150 mm. This stopper only sets the end position and does not lock the load without air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.