verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32X150-10S

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X150-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 150mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke150 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$70.01 $77.51Save 9% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X150-10S

The AirTAC SAIJ32X150-10-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 140-150 mm usable travel window, letting you dial back the nominal 150 mm stroke by up to 10 mm during machine commissioning without adding external stops. In this magnetic configuration, the extruded aluminum barrel includes sensor grooves on both sides for direct mounting of CMSE reed or DMSE solid-state switches.

It uses a G1/8 port, a 12 mm carbon steel piston rod with an M10x1.25 thread, and relies on 27 mm variable air cushions at both ends to decelerate the load. The rear adjuster acts purely as a travel stop, so it will not hold the load without live air pressure.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X150-10S Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32X150-10S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke150 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X150-10S

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×150Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X150-10S Is Used

tune

End-Stop Tuning

Fine-tune the retraction end position by up to 10 mm during machine commissioning to hit exact sensor targets without swapping cylinders.

settings_input_component

Product Changeover

Quickly adapt the 140-150 mm travel window on packaging lines when handling slightly different package dimensions.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X150-10S the Right Cylinder?

Choose this 32 mm bore adjustable cylinder when you need precise end-position tuning at setup or during product changeovers, rather than the fixed travel of a standard SAI model. Because the stroke is under 300 mm, side-load stress on the 12 mm rod is moderate, though long unsupported loads still need an external guide.

For an exact ISO 15552 replacement match, specify a 32 mm bore, 150 mm stroke, 10 mm adjustment range, PT tapered port threads, and the -S magnet option. Mounting options are limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2. For load-holding without live pressure, select a SAIL or BSAI cylinder instead, as this adjuster is not a lock.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X150-10S FAQ

It operates at speeds between 30 and 800 mm/s.

A rear stopper screw lets you shorten the effective travel from the 150 mm nominal stroke down to 140 mm, creating a 140-150 mm adjustable window. This stopper only sets the travel end and does not lock the load without live air.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X150-10S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32X150-10S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.