
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X150-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 150mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X150-20 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 130-150 mm usable travel window, allowing you to dial back the 150 mm nominal stroke by up to 20 mm during commissioning without swapping the cylinder or adding external stops.
The extruded aluminum barrel includes sensor grooves on both sides for CMSE reed or DMSE solid-state switches. This adjustable variant uses a reduced mounting subset (Basic, FA, LB, TC, FTC, TCM1, TCM2), omitting FB, CA, CB, and CR brackets.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X150-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 130-150 mm end-of-stroke position during setup without fabricating external mechanical stops.
Quickly adjust the retract end position on a packaging line when switching between different product sizes.
Fine-tune the final retract position to compensate for mechanical wear or sensor drift over time.
The rear adjuster screw acts solely as a mechanical stop to decelerate travel; it does not hold the load without live air. For load-holding without pressure, consider the SAIL or BSAI series.
This model is dimensionally interchangeable per ISO 15552. To match this SKU exactly when replacing a fixed-stroke cylinder, specify a 32 mm bore, 150 mm stroke, 20 mm adjustment range, PT tapered port thread, carbon steel rod, no magnet, and the reduced SAIJ mounting set.
Quick checklist
A rear adjusting screw lets you shorten the effective travel from the 150 mm nominal stroke by up to 20 mm, creating a 130-150 mm usable window. The adjuster sets the retract end-position and works with the variable air cushion to decelerate the load.
At the maximum operating pressure of 1.0 MPa, it delivers up to 82 kgf.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.