verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32X150-20S

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X150-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 150mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke150 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$70.01 $77.51Save 9% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X150-20S

The AirTAC SAIJ32X150-20-S is a double-acting, double-rod ISO 15552 profile cylinder with a built-in rear stroke adjuster. It provides a 130-150 mm usable travel window from its 150 mm nominal stroke, letting you dial back the extend position by up to 20 mm during commissioning. This variant includes a standard magnet for position sensing and uses a carbon steel piston rod.

Instead of adding external stops, the rear adjusting screw fine-tunes the end position cleanly. It uses a PT tapered G1/8 port and variable air cushions at both ends. The adjuster acts purely as a mechanical stop and does not hold the load without live air pressure. For load-holding needs, consider the SAIL or BSAI series. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X150-20S Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32X150-20S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke150 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X150-20S

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×150Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X150-20S Is Used

tune

End-Stop Tuning

Dial in the exact 130-150 mm extend position during machine setup without fabricating external physical stops.

settings_input_component

Product Changeover

Quickly adjust the rear screw on the line when product sizes change, saving downtime on repositioning cylinders.

precision_manufacturing

Sensor Equipped Tasks

Leverage the -S magnet with CMSE reed or DMSE solid-state switches in the dual sensor grooves for precise cycle feedback.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X150-20S the Right Cylinder?

An adjustable stroke is ideal for machine changeovers where the exact extend position varies slightly, avoiding the need to swap a fixed-stroke SAI cylinder. When replacing an ISO 15552 unit, match the 150 mm stroke, 20 mm adjustment, PT G1/8 port, and the -S magnet requirement. The 12 mm carbon steel rod handles standard loads, but long unsupported strokes over 300 mm require an external guide.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X150-20S FAQ

The 20 mm rear adjuster creates a usable travel window of 130 to 150 mm from the 150 mm nominal stroke.

No, the rear adjuster is a travel stop, not a lock. The SAIJ32X150-20-S cannot hold a load without live air pressure. For fail-safe load holding, use the SAIL or BSAI cylinder series instead.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X150-20S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32X150-20S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.