
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X150-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 150mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X150-30-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. The rear adjustment screw allows you to trim the nominal 150mm stroke back by up to 30mm, creating a precise 120-150mm usable travel window without adding external stops.
This 32mm bore variant uses a G1/8 PT tapered port and an M10x1.25 carbon steel rod. It incorporates variable air cushions at both ends to decelerate the moving load. The extruded aluminum barrel includes sensor grooves on both sides, and the mounting interface supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 attachments.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X150-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 120-150mm travel window during product size changes to set exact retract positions without swapping hardware.
Fine-tune the final resting point of your tooling at commissioning by trimming up to 30mm off the nominal stroke.
Set precise spacing for delicate component placement tasks using the rear adjuster instead of external mechanical stops.
If you need higher thrust, stepping up to the 40mm bore yields 628N. The adjustable stroke is selected over a fixed SAI cylinder when you need to fine-tune the retract end position during commissioning or product changeover. The rear screw acts purely as a travel stop and does not hold the load without live air; for fail-safe load holding, consider SAIL or BSAI cylinders. As a direct ISO 15552 interchangeable replacement, verify your bore, 150mm stroke, 30mm adjustment, PT port, and -S magnet requirements.
Quick checklist
At the maximum 1.0 MPa pressure, it can deliver up to 82 kgf.
The rear adjuster screw lets you shorten the effective travel from the nominal 150mm down to 120mm. This creates a 120-150mm usable window for fine-tuning the end position without replacing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.