
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X150-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 150mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X150-40 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a usable travel window of 110 to 150 mm, allowing you to dial back the nominal 150 mm stroke by up to 40 mm during commissioning.
The rear adjuster acts purely as a mechanical stop to set the retract end position and must not be mistaken for a locking device, as the cylinder cannot hold a load without live air pressure. This variant features a standard carbon steel piston rod and PT tapered port threads. It supports a speed range of 30 to 800 mm/s and includes sensor grooves on both sides of the extruded aluminum barrel for flexible switch placement.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X150-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance from 110 to 150 mm during machine setup to compensate for mechanical tolerances without machining new stop blocks.
Quickly adapt a packaging line for different carton sizes by turning the rear screw to shorten the cylinder's effective stroke on the fly.
Select this 32 mm bore model when your application requires precise end-position tuning without the hassle of swapping out physical components or adding external stopper blocks. Conversely, lighter duties might allow a smaller bore, though 32 mm is often the practical minimum for standard ISO 15552 machine layouts. The adjustable travel window is ideal for accommodating slight mechanical variations or product size changeovers on a production line.
As a dimensionally interchangeable ISO 15552 cylinder, it matches standard mounting footprints but uses a reduced mounting set: Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR options. This specific configuration includes a PT tapered port, no magnet (-S not specified), and a 40 mm adjustment range. For applications requiring true position holding without continuous air pressure, consider the AirTAC SAIL or BSAI series instead.
Quick checklist
The rear adjuster screw allows you to mechanically shorten the effective stroke by up to 40 mm, providing a usable travel range of 110 to 150 mm. It functions as a travel stop to fine-tune the end position and does not lock the load in place without air pressure.
At the maximum 1.0 MPa pressure, it can deliver up to 82 kgf.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.