
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X150-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 150mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X150-40-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. Equipped with a magnet for position sensing, it supports AirTAC CMSE reed and DMSE electronic sensors fitted into the dual-side barrel grooves.
This specific SKU provides a usable travel window of 110-150 mm, letting you dial back the nominal 150mm stroke by up to 40mm. The external rear stopper allows precise end-position tuning at commissioning without adding external stops. It uses a PT tapered port thread and includes variable air cushions at both ends, with a standard cushion length of 27mm.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X150-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 110-150mm stroke window on the rear screw during product size transitions to set new end stops without swapping hardware.
Fine-tune the extended end position during commissioning to perfect part alignment using the 40mm adjustment range.
Shorten the effective travel dynamically on test fixtures where the exact 150mm nominal stroke needs precise trimming.
Choose this 32mm bore adjustable-stroke cylinder when your application requires exact end-position tuning during machine setup or product changeover. The rear adjuster acts solely as a travel stop and does not hold the load without live air pressure; for fail-safe load holding, consider the SAIL or BSAI series. This SAIJ model is dimensionally interchangeable per ISO 15552 and uses the reduced SAIJ mounting set: Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
The rear adjuster screw acts as a mechanical stop that lets you shorten the effective travel from the 150mm nominal stroke down to 110mm, providing a 40mm tuning window without changing the cylinder itself.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.