
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X150-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 150mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X150-50 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 150 mm stroke that can be dialed back by up to 50 mm, creating a 100-150 mm usable travel window for precise end-position tuning during commissioning.
This adjustable model features a carbon steel piston rod with an M10x1.25 thread, paired with PT tapered port threading (G1/8) for pneumatic connections. The extruded aluminum barrel includes sensor grooves on both sides, allowing you to mount CMSE reed or DMSE electronic switches if a magnet is specified later. The rear adjustment screw acts purely as a mechanical stop to set the retract position and does not hold the load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X150-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 100-150 mm travel window during format changes without swapping cylinders or adding external mechanical stops.
Fine-tune the retract stroke at commissioning to achieve exact positioning for delicate picking and placing tasks.
Use the rear adjuster to safely set the exact end-stop distance during initial machine assembly and testing.
The 50 mm adjustment window is ideal for product-size changeovers on a line, giving you flexibility that a fixed-stroke SAI cylinder cannot match without external stops. For any load-holding requirements without continuous air pressure, this cylinder is not a lock; you should explore the SAIL or BSAI series instead.
When replacing an ISO 15552 cylinder, match the 32 mm bore, 150 mm nominal stroke, 50 mm adjuster, PT port thread, and your required mounting style. The SAIJ series supports a specific subset of mounts: Basic, FA, LB, TC, FTC, TCM1, and TCM2. Because the total stroke is 150 mm, the 12 mm carbon steel rod handles moderate side loads, but always guide the load externally to prevent binding.
Quick checklist
It features a rear mechanical stopper that allows you to shorten the effective stroke by up to 50 mm. This provides a usable travel window of 100 to 150 mm, which can be fine-tuned during commissioning without changing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.