
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X150-50S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 150mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X150-50-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to trim the effective travel back by up to 50 mm. This creates a highly flexible 100-150 mm usable stroke window, enabling precise end-position tuning at commissioning without swapping out the barrel or adding bulky external stops.
Equipped with a standard magnet for position sensing, this unit works seamlessly with AirTAC CMSE reed and DMSE electronic solid-state switches fitted into the dual-side sensor grooves on the extruded aluminum barrel. It features a PT tapered port connection and a 12 mm carbon steel piston rod. Remember that the rear adjuster acts strictly as a travel stop for deceleration alongside the variable air cushions; it does not hold a load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X150-50S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 100-150 mm stroke window during product size transitions to set new end positions rapidly without changing hardware.
Fine-tune the retract stop during commissioning to perfect timing and avoid mechanical crashes on delicate tooling.
Leverage the integrated magnet and dual sensor grooves to mount CMSE or DMSE switches exactly where the adjusted stroke ends.
Choose this 32 mm bore adjustable-stroke model when your machine setup requires variable end stops or frequent product-size changeovers, rather than committing to a fixed-stroke SAI cylinder.
When matching an ISO 15552 replacement, verify the 32 mm bore, 150 mm nominal stroke, 50 mm adjustment range, PT port thread, and the required magnet (-S) for CMSE or DMSE sensors. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options, omitting the FB, CA, CB, and CR variants. For any application requiring true load-holding without continuous air pressure, select a SAIL lock cylinder or an external rod lock instead of relying on this adjuster.
Quick checklist
It can reach a maximum of 82 kgf at 1.0 MPa.
The rear adjuster screw lets you shorten the 150 mm nominal stroke by up to 50 mm, creating a usable travel window of 100-150 mm to fine-tune the end position without external stops.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.