
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X150-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 150mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X150-75 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a usable travel window of 75 to 150 mm, allowing you to dial back the nominal 150 mm stroke by up to 75 mm during commissioning.
This adjustable-stop design eliminates the need to swap cylinders or bolt on external stoppers when fine-tuning end positions. The extruded aluminum barrel includes sensor grooves on both sides, and the mounting set covers Basic, FA, LB, TC, FTC, TCM1, and TCM2. Note that the rear adjuster acts strictly as a travel stop and does not hold the load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X150-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly reconfigure the retract distance from 150 mm down to 75 mm on packaging lines handling varying container sizes without changing hardware.
Fine-tune the exact end-of-stroke position during machine commissioning to perfect the seating force of delicate 32 mm bore assemblies.
Dial in the precise clamping depth on test fixtures where the effective travel window must be adjusted between cycles.
Choose this 32 mm bore when an application requires precise variable end-stops within a 75-150 mm window. Conversely, if lower friction or smaller footprint is needed, dropping to a smaller bore is ideal. Because this model lacks a magnet, position sensing requires external methods rather than CMSE or DMSE switches.
For ISO 15552 replacement matching, ensure you specify the 150 mm stroke, 75 mm adjustment range, PT G1/8 port, and the required mounting bracket. Since the 150 mm stroke is under the 300 mm threshold, external side-load guides are less critical, but the 12 mm rod still requires reasonably aligned mounting to prevent premature seal wear. For any load-holding requirements without continuous air pressure, consider the SAIL or BSAI series instead of relying on the adjuster.
Quick checklist
At the maximum 1.0 MPa pressure, it delivers up to 82 kgf.
The rear adjuster screw allows you to shorten the effective travel from its 150 mm nominal stroke, providing a usable window of 75 to 150 mm. It functions as a mechanical stop for end-position tuning and is not a locking device.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.