
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X150-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 150mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X150-75-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a usable travel window of 75 to 150 mm, allowing you to dial back the nominal stroke by up to 75 mm during commissioning.
This unit includes a standard carbon steel piston rod with an M10x1.25 thread, paired with PT tapered port threads and a G1/8 air supply connection. Because it is an -S variant, the piston carries a magnet for position sensing via AirTAC CMSE reed or DMSE electronic solid-state switches mounted in the dual-side sensor grooves. The rear adjuster acts purely as a mechanical stop to set the end position; it does not hold the load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X150-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance within the 75-150 mm window during machine commissioning to accommodate varying material thicknesses without adding external stopper blocks.
Quickly adjust the effective stroke on packaging lines when switching between different product sizes, using the rear screw to set new end positions rapidly.
Leverage the integrated magnet and dual sensor grooves to mount CMSE or DMSE switches for precise end-of-stroke detection alongside the mechanical stroke adjustment.
Choose this 32 mm bore adjustable-stroke cylinder when your application requires exact end-position tuning or frequent product changeovers without physically swapping out a fixed-stroke SAI cylinder. For applications needing true load-holding without continuous air pressure, a standard SAIJ is insufficient; consider an AirTAC SAIL pneumatic lock or BSAI clamp-lock cylinder instead.
When replacing an ISO 15552 cylinder, match these exact attributes: 32 mm bore, 150 mm nominal stroke, 75 mm adjustment range, PT port threads, and the -S magnet option. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 configurations, deliberately omitting FB, CA, CB, and CR. Since the stroke here is 150 mm, side-load risks are minimal, but long unsupported strokes nearing the 1000 mm maximum for this bore would require an external guide.
Quick checklist
The rear adjuster screw acts as a mechanical stop that lets you shorten the effective stroke from 150 mm down to as little as 75 mm. It sets the travel end position but does not lock or hold the load without live air pressure.
At the maximum 1.0 MPa pressure, it achieves up to 82 kgf of push force.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.