
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X155-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 155mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X155-20 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 135-155 mm usable travel window, letting you dial back the 155 mm nominal stroke by up to 20 mm during machine commissioning.
This model uses a carbon steel piston rod with an M10x1.25 thread and a G1/8 PT port. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE reed or DMSE electronic switches. It supports the reduced SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and relies on variable air cushions at both ends to decelerate the load.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X155-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 155 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×155 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the retract position within the 135-155 mm window during machine commissioning to achieve exact product placement.
Quickly adapt the cylinder's effective stroke on the line when switching to a new package size without replacing the actuator.
Choose this 32 mm bore adjustable cylinder when your setup requires precise end-position tuning for product changeovers without swapping hardware. The rear adjuster acts strictly as a travel stop, meaning this cylinder will not hold a load without live air pressure. For load-holding requirements, select a SAIL or BSAI series cylinder instead.
To match this ISO 15552 replacement, confirm the 155 mm stroke, 20 mm adjustment range, G1/8 PT port, and carbon steel rod. Because the stroke is 155 mm, external guiding is recommended to manage side loads and prevent rod binding.
Quick checklist
At 0.9 MPa, the push force increases to 724 N.
A rear adjusting screw lets you mechanically shorten the 155 mm nominal stroke by up to 20 mm, creating a 135-155 mm usable travel window. The adjuster acts as a physical stop and does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.