
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X155-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 155mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X155-20-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It features a built-in magnet for position sensing and provides a usable travel window of 135 to 155 mm, letting you dial back the stroke by up to 20 mm during commissioning.
This model utilizes a 12 mm carbon steel rod with an M10x1.25 thread, offering adequate stiffness for its compact size. The extruded aluminum barrel includes sensor grooves on both sides, directly supporting AirTAC CMSE reed and DMSE electronic solid-state switches. It uses a PT tapered G1/8 port and relies on variable air cushions at both ends to decelerate the piston, though neither the cushion nor the rear adjuster acts as a lock to hold the load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X155-20S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 155 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×155 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the 135-155 mm travel window during machine commissioning to perfectly strike a delicate component without repositioning the entire cylinder mount.
Quickly adjust the rear stop by up to 20 mm to accommodate varying package lengths on a packaging line, reducing downtime between production runs.
The rear adjuster allows you to fine-tune the travel window down to 135 mm, which is ideal for accommodating product size changes on a line. For applications needing true load-holding without continuous air pressure, consider the SAIL or BSAI series instead, as the SAIJ adjuster is strictly a travel stop.
When replacing an ISO 15552 cylinder, match the 32 mm bore, 155 mm nominal stroke, 20 mm adjustment range, PT G1/8 port, and the -S magnet requirement. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options, omitting the FB, CA, CB, and CR mounts. Because this unit features a 155 mm stroke, side-loading is minimal, but always ensure the M10x1.25 rod thread is properly aligned to prevent premature seal wear.
Quick checklist
The rear adjuster screw lets you shorten the effective travel from the nominal 155 mm down to 135 mm, creating a 20 mm adjustable window. This stopper physically limits the piston's retraction distance, allowing you to fine-tune the end position without adding external stops.
If you increase the pressure to 0.7 MPa, the push force rises to 563 N.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.