
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X155-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 155mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X155-30 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a 125-155 mm usable travel window, allowing you to trim the 155 mm nominal stroke by up to 30 mm during commissioning.
This extruded aluminum profile cylinder features PT tapered port threads (G1/8) and variable air cushions at both ends. The rear adjustment screw acts purely as a travel stop for end-position tuning, so it does not hold the load without live air pressure. For load-holding without supply pressure, consider an external rod lock or the related SAIL series.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X155-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 155 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×155 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance within the 125-155 mm window during machine commissioning to perfect part seating without machining new hard stops.
Quickly adjust the stroke by up to 30 mm on a packaging line when switching to a different product size, minimizing downtime between runs.
Fine-tune the tooling approach distance on an automated assembly station to accommodate minor variations in component tolerances.
Choose this 32 mm bore when an application requires fine-tuning the retract end-position without swapping cylinders or adding external stops. The 12 mm carbon steel rod and M10x1.25 thread handle moderate side loads, though any stroke at or above 300 mm requires an external guide to prevent rod binding.
To match this ISO 15552 interchangeable cylinder, specify the 32 mm bore, 155 mm stroke, 30 mm adjustment range, PT port thread, and your desired mounting set. SAIJ supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts, deliberately omitting FB, CA, CB, and CR. Since no magnet is specified, position sensing via CMSE reed or DMSE electronic switches is not enabled.
Quick checklist
At 0.7 MPa, the push force increases to 563 N.
A rear adjusting screw acts as a mechanical stop, allowing you to shorten the 155 mm nominal stroke by up to 30 mm. This creates a usable travel window of 125-155 mm, though the adjuster is a stop and not a lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.