
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X155-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 155mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X155-30-S is a double-acting ISO 15552 profile cylinder with a rear stroke adjuster, letting you dial back the 155 mm travel by up to 30 mm. This yields a 125-155 mm usable end-position window for fine-tuning at commissioning without adding external stops.
This SKU includes a standard magnet for CMSE reed and DMSE electronic sensors, fitting neatly into the extruded aluminum barrel grooves on both sides. The 12 mm carbon steel rod with an M10x1.25 thread handles light loads well, though long unsupported strokes still require an external guide to prevent side-load wear.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X155-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 155 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×155 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly fine-tune the 125-155 mm retraction end-stop during product size changes on a packaging line without swapping out the entire cylinder.
Dial in the exact clamping distance during machine commissioning using the 30 mm rear adjustment screw, avoiding the need for external mechanical stops.
Select the SAIJ32X155-30-S when an application demands precise variable end-stops rather than a fixed 155 mm stroke. This profile cylinder uses a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and PT tapered G1/8 ports.
The rear adjuster acts purely as a travel stop, meaning this cylinder cannot hold a load or maintain its position without live air pressure. For true fail-safe load-holding without continuous air, integrate an external pilot-operated check valve or explore the AirTAC SAIL or BSAI locking cylinder series.
Quick checklist
The rear adjuster screw lets you mechanically shorten the 155 mm nominal stroke by up to 30 mm, providing a usable travel window of 125-155 mm. It acts as a physical stop to set the end position and does not lock the load without live air pressure.
It is dimensionally interchangeable per ISO 15552 and operates at speeds between 30 and 800 mm/s.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.