
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X160-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 160mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X160-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 150 to 160 mm, allowing you to dial back the extend position by up to 10 mm during commissioning without adding external stops.
This model uses a 12 mm carbon steel piston rod with an M10x1.25 thread, paired with PT (tapered) port threading. The extruded aluminum barrel includes sensor grooves on both sides for direct mounting of CMSE reed or DMSE electronic switches. It features adjustable air cushions at both ends with a 27 mm cushion length to manage end-of-stroke deceleration.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X160-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the extend stroke within a 150-160 mm window to perfectly strike a workpiece without machining custom spacers.
Quickly adjust the rear stop screw by up to 10 mm when switching between product sizes on a shared conveyor line.
The adjustable stroke is ideal for machine setups requiring a variable end-stop or fine-tuning during product changeover, replacing the need to swap out a fixed-stroke SAI cylinder.
For an exact ISO 15552 replacement match, specify: 32 mm bore, 160 mm stroke, 10 mm adjustment range, PT tapered ports, and the standard carbon steel rod. Because the plain SAIJ design relies on live air to hold position, the rear adjuster acts only as a travel stop and not a load-holding lock; if you need fail-safe load holding without air pressure, consider the SAIL or BSAI series instead.
Quick checklist
The rear adjuster screw lets you shorten the effective stroke by up to 10 mm, providing a usable travel window of 150 to 160 mm. It acts as a mechanical stop to set the end position and does not lock the load without live air pressure.
The standard operating speed range for this bore size is 30-800 mm/s, supported by adjustable air cushions at both ends.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.