
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X160-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 160mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X160-100-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to dial back the nominal 160 mm travel by up to 100 mm. This creates a wide 60-160 mm usable stroke window, letting you fine-tune the retract end-position during commissioning without swapping out the barrel or adding external stops.
Equipped with a standard magnet, this unit directly supports AirTAC CMSE reed and DMSE electronic sensors housed neatly within the extruded aluminum barrel's dual sensor grooves. The M10x1.25 carbon steel rod and PT tapered port G1/8 connection keep the footprint compact while providing reliable threaded integration into your existing pneumatic setup.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X160-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance from 60 to 160 mm on the fly, perfect for test rigs and prototyping cells where the optimal stroke length is determined empirically during initial machine setup.
Rapidly adapt packaging or sorting machinery to different carton sizes without changing out the cylinder, using the rear screw to shift the end position and reduce changeover downtime.
Choose this 32 mm bore when your application requires a highly variable end-stop within a compact ISO 15552 mounting interface. The massive 100 mm adjustment range is ideal for machines processing multiple product sizes on a single line, completely eliminating the need to maintain separate cylinders for each stroke length. If your process requires even less travel, stepping down to a fixed-stroke SAI variant avoids unnecessary adjuster length.
Because the total stroke is 160 mm, the M10x1.25 rod does not strictly require an external guide, but any off-center load should still be properly supported. Remember that the rear adjuster acts purely as a travel stop and does not hold the load without live air pressure; for true fail-safe load holding, consider an AirTAC SAIL or BSAI cylinder. Mounting options include the SAIJ subset of Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
The rear of the cylinder features an external adjusting screw that physically stops the piston before it reaches the full 160 mm mark. By turning this screw, you can shorten the effective stroke by up to 100 mm, giving you a usable travel window of 60 to 160 mm without replacing the cylinder.
If you increase the pressure to 0.7 MPa, the push force rises to 563 N.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.