
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X160-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 160mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X160-10-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 150-160 mm, allowing you to dial back the 160 mm nominal stroke by up to 10 mm during commissioning.
This unit includes a standard carbon steel rod and a -S magnet for position sensing. You can pair the integrated dual-side sensor grooves with CMSE reed or DMSE electronic switches. The rear adjuster functions purely as a mechanical stop for end-position tuning; it does not lock the load, so live air is required to hold position.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X160-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 150-160 mm travel distance during machine commissioning without adding external stoppers.
Quickly adapt the cylinder's retract end-stop on the line when switching to a slightly different product size.
If your process needs less force, stepping down is not an option within this series, but stepping up to a 40 mm bore yields 628 N. The 10 mm adjustable window is ideal for fine-tuning end stops at machine setup without swapping hardware. For fixed travel without adjustment, a standard SAI cylinder is sufficient. To replace this ISO 15552 cylinder, match the 32 mm bore, 160 mm stroke, 10 mm adjust, PT G1/8 ports, and the -S magnet.
With a 160 mm stroke, side loads are minimal, but the 12 mm rod and M10x1.25 thread handle standard loads well. For holding a load securely without continuous air pressure, consider an AirTAC SAIL or BSAI cylinder, as this SAIJ adjuster is not a locking device.
Quick checklist
A rear adjusting screw lets you shorten the effective stroke by up to 10 mm, providing a usable travel window of 150-160 mm. It acts as a mechanical stop for end-position tuning and does not lock the load without live air.
The maximum push force is 724 N at 0.9 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.