verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32X160-20

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X160-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 160mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke160 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$69.54 $77.04Save 9% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X160-20

The AirTAC SAIJ32X160-20 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 140-160mm, allowing you to dial back the 160mm nominal stroke by up to 20mm during commissioning.

This model uses a standard carbon steel piston rod with an M10x1.25 thread and a PT G1/8 port. The extruded aluminum barrel includes sensor grooves on both sides, and the rear adjuster acts purely as a travel stop for fine-tuning end positions without swapping cylinders.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X160-20 Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32X160-20
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke160 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X160-20

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×160Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X160-20 Is Used

settings_input_component

Machine Changeovers

Dial in the exact 140-160mm end-stop during product size transitions without replacing the cylinder or adding external stops.

precision_manufacturing

End-Position Tuning

Fine-tune the retract stroke at commissioning to hit precise mechanical endpoints, absorbing minor fixture alignment variations.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X160-20 the Right Cylinder?

If you need less force, step down to a 25mm bore, or step up to a 40mm bore for 628N if your payload increases. The adjustable stroke is ideal for machine changeovers, letting you set variable end-stops on the fly rather than installing a fixed-stroke SAI cylinder.

This SAIJ32X160-20 is dimensionally interchangeable per ISO 15552. Configuration: 32mm bore, 160mm stroke, 20mm adjustment, PT G1/8 port, carbon steel rod, no magnet. It supports a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2. Note that the rear adjuster is a stop, not a lock; for load-holding without live air, consider an external rod lock or the SAIL series.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X160-20 FAQ

The rear adjuster screw lets you shorten the 160mm nominal stroke by up to 20mm, creating a 140-160mm usable travel window. It acts as a mechanical stop to fine-tune the end position and does not lock the load without live air.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X160-20

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32X160-20 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.