
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X160-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 160mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X160-20-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a 160 mm nominal stroke that can be fine-tuned down by up to 20 mm, creating a precise 140-160 mm usable travel window.
This model features a standard carbon steel piston rod and a PT tapered port thread (G1/8). The integrated magnet (-S) supports position sensing via AirTAC CMSE reed or DMSE electronic switches mounted in the dual-side sensor grooves. It utilizes variable air cushions at both ends and operates at speeds between 30 and 800 mm/s.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X160-20S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 140-160 mm travel distance during machine commissioning to perfect component seating without adding external physical stops.
Quickly adjust the rear screw to accommodate slight variations in part sizes on a production line, minimizing downtime between batches.
If your setup requires greater thrust, stepping up to the 40 mm bore yields 628 N. The adjustable rear stopper allows you to dial in the 140-160 mm travel window during commissioning or product changeovers, avoiding the need to physically swap out a fixed-stroke SAI cylinder.
For ISO 15552 replacement matching, ensure you specify the 32 mm bore, 160 mm stroke, 20 mm adjustment range, PT port thread, and the -S magnet option. Note that the SAIJ mounting set is limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR. Because the stroke is 160 mm, the 12 mm rod handles standard loads well, but long unsupported travel still requires an external guide. The rear adjuster acts only as a travel stop and does not hold the load without live air; for pneumatic locking, consider the SAIL or BSAI series.
Quick checklist
At the maximum 1.0 MPa pressure, it achieves 82 kgf.
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the 160 mm nominal stroke by up to 20 mm. This creates a usable travel window of 140 to 160 mm, which can be fine-tuned during setup without replacing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.