
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X160-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 160mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X160-30-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 160 mm stroke that can be fine-tuned backward by up to 30 mm, yielding a precise 130-160 mm usable travel window for product changeovers.
This unit features a standard carbon steel piston rod and a built-in magnetic piston (-S) for position sensing. The extruded aluminum barrel includes sensor grooves on both sides, accepting AirTAC CMSE reed and DMSE electronic solid-state switches without requiring extra brackets. Adjustable pneumatic cushions at both ends decelerate the load, but the rear adjuster acts only as a travel stop and does not hold the load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X160-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 130-160 mm travel end-stop during machine setup to perfect part ejection without machining custom spacers.
Quickly shorten the cylinder's effective stroke on a packaging line when switching to a different carton size, saving retooling time.
Leverate the magnetic piston with DMSE electronic sensors to confirm exact positions across the adjusted travel window.
Select this 32 mm bore adjustable-stroke cylinder when your setup requires exact end-position tuning at commissioning without swapping components or adding external stops. For fixed-travel needs without a rear adjuster, the standard SAI series is the direct alternative.
To replace an ISO 15552 cylinder, match the 32 mm bore, 160 mm stroke, 30 mm adjustment range, PT tapered port threads, and the -S magnet option. The SAIJ series supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts, deliberately omitting FB, CA, CB, and CR brackets. Because the 12 mm rod and M10x1.25 thread carry limited side load, and the 160 mm stroke is relatively short, ensure proper guiding for heavy offset loads. For load-holding without live pressure, consider the SAIL or BSAI series instead.
Quick checklist
A rear adjusting screw acts as an external stopper, allowing you to shorten the effective stroke by up to 30 mm. This provides a usable travel window of 130 to 160 mm, enabling fine-tuning of the retract end-position without replacing the cylinder.
At the maximum operating pressure of 1.0 MPa, the push force reaches 802 N.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.