
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X160-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 160mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X160-40-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It features a 32mm bore and a 160mm nominal stroke, but the external stopper screw lets you dial back the effective travel by up to 40mm, creating a 120-160mm usable positioning window. This on-machine fine-tuning capability eliminates the need to swap cylinders or bolt on external stops during product changeovers.
The extruded aluminum barrel includes sensor grooves on both sides, and because this SKU includes the magnet option, it directly supports AirTAC CMSE reed and DMSE solid-state switches. The rear adjuster acts strictly as a travel stop for end-position tuning, not a lock, and the standard air cushions handle deceleration without holding the load.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X160-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract position within a 120-160mm window during machine commissioning without swapping cylinders.
Quickly adjust the stroke by up to 40mm on packaging lines when handling different carton lengths.
Use the rear stopper to precisely set the end-of-stroke position for light-duty 402N assembly tasks.
The 40mm adjustment range is ideal for commissioning setups where the exact retract position varies by product size, giving you a 120-160mm travel window without buying a custom cylinder. For strokes of 160mm, the 12mm rod handles moderate side loads, but long unsupported travel still requires an external guide.
This cylinder uses a PT tapered port and the reduced SAIJ mounting set: Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, and CR). It is dimensionally interchangeable per ISO 15552. Because the adjuster and air cushions only set the travel end, a plain SAIJ does not hold its position without live air; for true load-holding, use SAIL or BSAI types.
Quick checklist
The rear adjusting screw acts as an external stopper that lets you shorten the 160mm nominal stroke by up to 40mm, providing a usable travel window of 120-160mm. It sets the end position but does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.