
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X160-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 160mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X160-50 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 110-160mm usable travel window, allowing you to dial back the nominal 160mm stroke by up to 50mm during commissioning.
The extruded aluminum barrel includes sensor grooves on both sides for CMSE reed or DMSE electronic switches. It supports a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and relies on variable air cushions at both ends to decelerate the load. Note that the rear adjuster acts only as a travel stop, not a lock, so it will not hold a load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X160-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly fine-tune the 110-160mm travel window during product size transitions without swapping out the physical cylinder.
Set precise retract positions on the fly for multi-format packaging lines using the rear 50mm adjustment screw.
If you need more thrust, stepping up to the 40mm bore yields 628N. The 50mm adjustment range is perfect for product-size changeovers, eliminating the need to swap cylinders or add external stops. For fixed-travel needs without the adjuster, the standard SAI series is a direct alternative.
Because this is a 160mm stroke, the 12mm rod provides moderate side-load resistance, but an external guide is recommended for heavy lateral loads. If the machine requires true load-holding without continuous air pressure, use an SAIL pilot-lock or BSAI clamp-lock cylinder instead of relying on the SAIJ adjuster. This model is dimensionally interchangeable per ISO 15552.
Quick checklist
At 0.7 MPa, the push force increases to 563N.
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the 160mm nominal stroke by up to 50mm. This creates a usable travel window of 110-160mm, but it does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.